Zebra S4M - Manual (Page 87)

81 Routine Maintenance
Cleaning Procedures
10/21/05 S4M User Guide 13290L-001 Rev. A
Clean the Media Compartment and Sensors
To clean the media compartment and sensors, complete these steps:
1. Brush or vacuum any accumulated paper lint and dust away from the media and ribbon
paths.
2. Brush or vacuum any paper lint and dust away from the sensors (see Figure 28 ).
Figure 28 • Cleaning the Sensors
1 Take-label sensor
2 Ribbon sensor
3 Transmissive sensor
4 Reflective sensor
1
3
4
2