Zebra S4M User Manual
Page 81
75
Configuration
Control Panel LCD Display
10/21/05
S4M User Guide
13290L-001 Rev. A
CHANGE GATEWAY
Change the Gateway
This parameter can be modified only when PERMANENT is selected for
OBTAIN IP ADDRESS
.
Selections: 0 to 255 for each field
Default Value: 0.0.0.0
Note •
Leading zeroes are not shown in the address. If an IP
address contains more digits than can be displayed at one time, use
the left or right arrows to scroll through the digits.
To modify this parameter:
• To increase the value, press the up arrow.
• To decrease the value, press the down arrow.
CHANGE IP PROTOCOL
Change the IP Protocol
Determines the method(s) by which the print server (wired or wireless)
receives the IP address from the server.
This parameter can be modified only when
AUTO SELECT
is selected
for
OBTAIN IP ADDRESS
.
Selections: ALL, GLEANING ONLY, RARP, BOOTP, DHCP,
DHCP AND BOOT
Default Value: ALL
To modify this parameter:
• Press the up or down arrow to scroll through the selections.
Table 12 • Print Server LCD Displays (Page 2 of 2)
Parameter
Explanation