Print density and position adjustment, Print density and position adjustment -5 – Xerox 490 User Manual
Page 95
Xerox 490/980 Color Continuous Feed Printing System
Printer Management
Printer & PC GUI Guide
7-5
Print Density and Position Adjustment
Print density can be set at seven levels. It is set in monochrome mode on the Monochrome and
in color mode on each of the K (black), C (cyan), M (magenta) and Y (yellow). On the Dens/Pos
Adjust tab, monochrome mode density and print position can be adjusted.
The following contents can be adjusted.
•
Print position adjustment: The horizontal/vertical offset value can be changed.
•
Print density setting: The print density can be changed.
•
Operating buttons:
•
Setting: The information is updated according to the changes made.
•
Cancel: The operation is cancelled and the information before making changes is
shown.
Operation is possible while the printer is stopped.