ZyXEL Communications Prestige 480 - Manual (Page 120)

Prestige 480 Dual BRI ISDN Router
7-4 Bridging Setup
Timeout (min) retain the Ethernet Addr information in its internal tables while the line is down. If
this information is retained, your Prestige will not have to recompile the tables
when the line is brought back up.
Once you have completed filling in the Network Layer Options Menu, press [Enter] to return to Menu 11.1.
Then press [Enter] at the message [Press ENTER to Confirm…] to save your configuration, or press [Esc]
to cancel.
7.3 Bridge Static Route Setup
Similar to network layer static routes, a bridging static route tells the Prestige about the route to a node before
a connection is established. You configure bridge static routes in Menu 12.3.1, by pressing 3 in menu 12 and
then selecting one of the bridge static routes as shown next.
Menu 12.3 - Bridge Static Route Setup
Menu 12.3 - Bridge Static Route Setup
1. ________
2. ________
3. ________
4. ________
Enter selection number:
Menu 12.3.1 - Edit Bridge Static Route
Route #: 1
Route Name= ?
Active= No
Ether Address= ?
IP Subnet Mask=
Gateway IP = 1
Press ENTER to CONFIRM or ESC to CANCEL: