ZyXEL Communications Prestige 480 - Manual (Page 45)

Prestige 480 Dual BRI ISDN Router
Hardware Installation and Setup 2-5
Figure 2-3 Power-On Display
Step 2. Entering Password
The login screen appears after you press [Enter], prompting you to enter the password, as shown next.
For your first login, enter the default password 1234. As you type the password, the screen displays a ( X)
for each character you type.
Figure 2-4 Login Screen
Please note that if there is no activity for longer than 5 minutes after you log in, your Prestige will
automatically log you out and will display a blank screen. If you see a blank screen, press [Enter] to bring
up the login screen again.
2.7 Navigating the SMT Interface
The SMT (System Management Terminal) is the interface that you use to configure your Prestige.
Several operations that you should be familiar with before you attempt to modify the configuration are listed
in the table below.
Table 2-2 Main Menu Commands
Operation Press/<read> Description
Move forward to
another menu [Enter] To move forward to a sub-menu, type in the number of the
desired sub-menu and press [Enter].
Move backward to
a previous menu [Esc] Press the [Esc] key to move back to the previous menu.
Move to a submenu Press the [Space
bar] to change NO
to YES then press
Fields beginning with “Edit” have a default setting of No. Press
the [Space bar] to change No to Yes, then press [ENTER] to go
to a submenu.
Enter Password : XXXX