ZyXEL Communications Prestige 480 - Manual (Page 33)

Prestige 480 Dual BRI ISDN Router
Getting to know your Prestige 1-3
IP Policy Routing Support
The Prestige can now override the default routing behavior and forward packets based on the policies defined
by the network administrator.
PPP Support
The Prestige supports PPP (Point-to-Point Protocol) link layer protocol.
PPP Multilink Support
The Prestige can bundle up to four B-channels in a single connection using the PPP Multilink Protocol The
number of links can be either statically configured or dynamically managed based on traffic demand.
Bandwidth-On-Demand
The Prestige can dynamically allocate bandwidth by adding and dropping links according to traffic demand.
The telephone number of an additional link can be obtained either with BAP (Bandwidth Allocation
Protocol) or statically configured.
Full Network Management
♦
Windows based PNC (Prestige Network Commander).
♦
SNMP (Simple Network Management Protocol) support.
♦
SMT (System Management Terminal) access through telnet connection.
PNC
The Prestige Network Commander (PNC) is a C++ based utility designed to allow users t o access the
Prestige’s management settings via Windows. For configuring your Prestige with PNC, use PNC ISDN
Series Version 2.20.
SNMP
The Simple Network Management Protocol (SNMP) is a management protocol for collecting information
from devices on the n etwork. When TCP/IP is configured in your Prestige, the SNMP agent functionality
allows a manager station to manage and monitor the Prestige through the network.