ZyXEL Communications Prestige 480 - Manual (Page 138)

Prestige 480 Dual BRI ISDN Router
8-16 Dial-In Server Configuration
Menu 13
Figure 8-14 Configuring CLID with Callback
Testing your Connection with Callback and CLID
Go to Menu 24.8 (Prestige on LAN 2) and type “sys trcl call”. The Prestige displays all communication
traces as shown in the next figure. If CLID authentication fails, this means that the calling number does not
match the Rem CLID number in Menu 11.1.
Menu 13 - Default Dial -in Setup
Telco Options:
CLID Authen= Required
PPP Options:
Recv Authen= CHAP/PAP
Compression= Yes
Mutual Authen= No
PAP Login= N/A
PAP Password= N/A
Multiple Link Options:
Max Trans Rate= 256
Callback Budget Management:
Allocated Budget(min)=
Period(hr)=
IP Address Supplied By:
Dial -in User= Yes
IP Pool= No
IP Start Addr= N/A
IP Count(1,4)= N/A
Session Options:
Edit Filter Sets= No
Press ENTER to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.
Set this field
to Required