ZyXEL Communications NetAtlas Workgroup - Manual (Page 132)

NetAtlas Workgroup Ethernet Switch Manager User’s Guide
Chapter 14 Switch Configuration 132
Figure 88 Switch Configuration: Mirroring
The following table describes the labels in this screen.
Table 64 Switch Configuration: Mirroring
LABEL DESCRIPTION
Monitor
Port
The monitor port is the port you copy the traffic to in order to examine it in more detail
without interfering with the traffic flow on the original port(s). Select a port from the drop-
down list box.
Mirrored
Port
Select a port from the drop-down list box to mirror the traffic on a port.
Direction This field is not available on all switch models.
Select the traffic direction from the drop-down list box. Choices are Ingress (incoming) or
Egress (outgoing).
Ingress You can specify to copy all incoming traffic or traffic to/from a specified MAC address.
Select All to copy all incoming traffic from the mirrored port(s).
Select Destination MAC to copy incoming traffic to a specified MAC address on the
mirrored port(s). Enter the destination MAC address in the fields provided.
Select Source MAC to copy incoming traffic from a specified MAC address on the
mirrored port(s). Enter the source MAC address in the fields provided.
Egress You can specify to copy all outgoing traffic or traffic to/from a specified MAC address.
Select All to copy all outgoing traffic from the mirrored port(s).
Select Destination MAC to copy outgoing traffic to a specified MAC address on the
mirrored port(s). Enter the destination MAC address in the fields provided.
Select Source MAC to copy outgoing traffic from a specified MAC address on the
mirrored port(s). Enter the source MAC address in the fields provided.
Apply Click Apply to save the changes.