ZyXEL Communications NetAtlas Workgroup - Manual (Page 157)

NetAtlas Workgroup Ethernet Switch Manager User’s Guide
157 Chapter 17 Multicast Configuration
Note: When you apply a multicast template, all custom port multicast settings will be
erased.
In the Multicast Setting screen, select a device in the device list panel and click Load
Template. A screen displays as shown.
Figure 108 Multicast Configuration: Multicast Settings: Load Template
The following table describes the labels in this screen.
Table 82 Multicast Configuration: Multicast Settings: Load Template
LABEL DESCRIPTION
Device Type Select a device type from the drop-down list box.
Template
No. This field displays the index number.
Multicast
Name
This field displays the name of a multicast template you create using the Template
screen.
PortList This table displays the template settings. Refer to Figure 106 on page 155 for more
information.
Apply Click Apply to save the settings and close this screen.
Cancel Click Cancel to discard the changes and close this screen.