ZyXEL Communications NetAtlas Workgroup - Manual (Page 78)

NetAtlas Workgroup Ethernet Switch Manager User’s Guide
Chapter 7 Provisioning 78
Figure 40 Provisioning: IGMP Filter: Apply to Devices: Successful
7.3 Removing an IGMP Filter Profile
Follow the steps below to remove an IGMP filter from a device.
1 Click Provisioning > IGMP Filter Provision to display the screen as shown.
2 Select Remove IGMP Filters under Action.
3 Select a profile you want to remove and click Add. You can view the profile settings by
clicking View IGMP Filter. Refer to the chapter on IGMP filter template settings for
field
Figure 41 Provisioning: IGMP Filter: Remove From Devices
4 Click Apply To Devices.
5 A screen displays as shown. Select the device(s) from which you want to remove the
IGMP filter(s). To select more than one device, press [SHIFT] or [CTRL] and select at
the same time.