ZyXEL Communications NetAtlas Workgroup - Manual (Page 63)

NetAtlas Workgroup Ethernet Switch Manager User’s Guide
63 Chapter 5 View
5.7.3 DHCP Server Status
Follow the steps below to view the DHCP server status of a selected device.
1 Click View > IP Application Status.
2 Select a switch from the list located on the left-hand side of the screen.
3 Click the DHCP Server Status tab.
Figure 30 View: IP Application Status: DHCP Server Status
The following table describes the labels in this screen.
Table 27 View: IP Application Status: DHCP Server Status
LABEL DESCRIPTION
Index This is the index number.
VID This field displays the ID number of the VLAN group to which this DHCP settings
apply.
Server Status This field displays the starting DHCP client IP address.
IP Pool Size This field displays the size of the DHCP client IP address pool.
Polling The text box displays how often (in seconds) this screen refreshes. You may
change the refresh interval by typing a new number in the text box and then clicking
Apply.
Close Click Close to close this screen.