ZyXEL Communications NetAtlas Workgroup - Manual (Page 62)

NetAtlas Workgroup Ethernet Switch Manager User’s Guide
Chapter 5 View 62
Figure 29 View: IP Application Status: IP Table Status
The following table describes the labels in this screen.
Table 26 View: IP Application Status: IP Table Status
LABEL DESCRIPTION
Sort by Click one of the following buttons to display and arrange the data according to that button
type. The information is then displayed in the summary table below.
IP Click this button to display and arrange the data according to IP address.
VID Click this button to display and arrange the data according to VLAN group.
Port Click this button to display and arrange the data according to port number.
Index This field displays the index number.
IP Address This is the IP address of the device from which the incoming packets came.
VID This is the VLAN group to which the packet belongs.
Port This is the port from which the above IP address was learned. This field displays CPU to
indicate the IP address belongs to the switch.
Type This shows whether the IP address is dynamic (learned by the switch) or static
(belonging to the switch).
Polling The text box displays how often (in seconds) this screen refreshes. You may change the
refresh interval by typing a new number in the text box and then clicking the Apply
button.
Close Click Close to close the screen.