ZyXEL Communications NetAtlas Workgroup User Manual
Page 163
NetAtlas Workgroup Ethernet Switch Manager User’s Guide
163
Chapter 17 Multicast Configuration
Figure 114 Multicast Configuration: MVR: Add
4 In the Start Address field, enter the starting IP multicast address of the multicast group
in dotted decimal notation.
5 In the End Address field, enter the ending IP multicast address of the multicast group in
dotted decimal notation.
Enter the same IP address as the Start Address field if you want to configure only one IP
address for a multicast group.
6 Click OK to save the settings and close this screen. Otherwise, click Cancel to discard
the settings and close this screen.
7 A screen displays showing the configuration result. Click Done to close the screen.
Figure 115 Multicast Configuration: MVR: Add MVR Group: Result