ZyXEL Communications P-2304R-P1 Series - Manual (Page 125)

Chapter 10 Phone
P-2304R-P1 Series User’s Guide
125
Figure 62 VoIP > Phone > Analog Phone
Each field is described in the following table.
10.2.2 Advanced Analog Phone Setup Screen
Use this screen to edit advanced settings for each phone port. To access this screen, click
Advanced Setup in VoIP > Phone > Analog Phone.
Table 52 VoIP > Phone > Analog Phone
LABEL DESCRIPTION
Phone Port
Settings
Select the phone port you want to see in this screen. If you change this field, the
screen automatically refreshes.
Outgoing Call Use
SIP1-4 Select the SIP account(s) used by this phone port when it make calls.
If you select more than one SIP accounts, the ZyXEL Device tries to use the last
registered SIP account.
Incoming Call
apply to
SIP1-4 Select the SIP account(s) for phone calls received on this phone port.
If you select more than one source for incoming calls, there is no way to
distinguish between them when you receive phone calls.
Apply Click this to save your changes and to apply them to the ZyXEL Device.
Reset Click this to set every field in this screen to its last-saved value.
Advanced Setup Click this to edit the advanced settings for this phone port. The Advanced Analog
Phone Setup screen appears.