2 zyxel device access and login, Zyxel device access and login – ZyXEL Communications P-2304R-P1 Series User Manual
Page 216
Chapter 21 Troubleshooting
P-2304R-P1 Series User’s Guide
216
21.2 ZyXEL Device Access and Login
V
I forgot the IP address for the ZyXEL Device.
1 The default IP address is 192.168.1.1.
2 If you changed the IP address and have forgotten it, you might get the IP address of the
ZyXEL Device by looking up the IP address of the default gateway for your computer.
To do this in most Windows computers, click Start > Run, enter cmd, and then enter
ipconfig. The IP address of the Default Gateway might be the IP address of the ZyXEL
Device (it depends on the network), so enter this IP address in your Internet browser.
3 If this does not work, you have to reset the device to its factory defaults. See
V
I forgot the password.
1 The default password is 1234.
2 If this does not work, you have to reset the device to its factory defaults. See
V
I cannot see or access the Login screen in the web configurator.
1 Make sure you are using the correct IP address.
• Use the ZyXEL Device’s LAN IP address when configuring from the LAN.
• Use the ZyXEL Device’s WAN IP address when configuring from the WAN.
• The default LAN IP address is
192.168.1.1
.
• If you changed the LAN IP address (
), enter the new one as the
URL.
• If you changed the LAN IP address and have forgotten it, see the troubleshooting
suggestions for
I forgot the IP address for the ZyXEL Device.
2 Check the hardware connections, and make sure the LEDs are behaving as expected. See
the Quick Start Guide and
.
3 Make sure your Internet browser does not block pop-up windows and has JavaScripts
.
4 If you disabled Any IP (
), make sure your computer is in the
same subnet as the ZyXEL Device. (If you know that there are routers between your
computer and the ZyXEL Device, skip this step.)
• If there is a DHCP server on your network, make sure your computer is using a
dynamic IP address. See
. Your ZyXEL Device is a DHCP
server by default.