ZyXEL Communications P-2304R-P1 Series - Manual (Page 77)

Chapter 6 WAN
P-2304R-P1 Series User’s Guide
77
2 If the ISP did not give you DNS server information, leave the DNS Server fields in the
WAN Advanced screen set to From ISP for the ISP to dynamically assign the DNS
server IP addresses.
6.2 WAN Internet Connection Screen
Use this screen to set up your Internet connection. This screen depends on the type of Internet
connection you have.
6.2.1 Ethernet
Use this screen to set up an Ethernet connection (no Roadrunner service) with the ISP. To
access this screen, click Network > WAN > Internet Connection.
Figure 35 Network > WAN > Internet Connection (Ethernet)
"
Some ISPs, such as Telstra, send UDP heartbeat packets to verify that the
customer is still online. In this case, create a WAN to LAN firewall rule for those
packets. Contact your ISP to find the correct port number.
Each field is described in the following table.
Table 30 Network > WAN > Internet Connection (Ethernet)
LABEL DESCRIPTION
ISP Parameters
for Internet
Access
Encapsulation Select Ethernet.