3 wan advanced screen, 81 6.3 wan advanced screen – ZyXEL Communications P-2304R-P1 Series User Manual

Page 81

Advertising
background image

Chapter 6 WAN

P-2304R-P1 Series User’s Guide

81

6.3 WAN Advanced Screen

Use this screen to set up DNS servers, RIP, and Windows Networking policies for the WAN.
To access this screen, click Network > WAN > Advanced.

Get automatically

from ISP

Select this if your ISP did not assign you a static IP address.

Use Fixed IP

Address

Select this if your ISP assigned you a static IP address.

My WAN IP

Address

Enter the IP address provided by your ISP.

Remote IP

Address

Enter the IP address your ISP provided for the remote (peer) server.

Remote IP Subnet

Mask

Enter the subnet mask your ISP provided for the remote server.

Metric

Usually, you should keep the default value. This field is related to RIP. See

Chapter 7 on page 85

for more information.

The metric represents the "cost of transmission". A router determines the best

route for transmission by choosing a path with the lowest "cost". The smaller the

metric, the lower the "cost". RIP uses hop count as the measurement of cost,

where 1 is for a directly-connected network. The metric must be 1-15; if you use a

value higher than 15, the routers assume the link is down.

Private

Usually, you should keep the default value. This field is related to RIP. See

Chapter 7 on page 85

for more information.

This field determines whether or not the ZyXEL Device includes the route to this

remote node in its RIP broadcasts. If you select Yes, this route is not included in

RIP broadcast. If you select No, the route to this remote node is propagated to

other hosts through RIP broadcasts.

WAN MAC

Address

Spoof WAN MAC

Address

Select this if you do not want to use the default MAC address for the ZyXEL

Device.

Clone the

computer’s MAC

address - IP

Address

This field is enabled if you select Spoof WAN MAC Address.
Enter the IP address of the computer whose MAC address you want the ZyXEL

Device to use instead of the default MAC address.

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

Reset

Click this to set every field in this screen to its last-saved value.

Table 32 Network > WAN > Internet Connection (PPPoE)

LABEL

DESCRIPTION

Advertising