ZyXEL Communications P-2304R-P1 Series User Manual
Page 56
Chapter 4 Wizard Setup
P-2304R-P1 Series User’s Guide
56
"
You cannot use the
if the PPPoE remote server cannot be
discovered automatically. You must use the screens discussed in
instead.
Figure 19 Connection Wizard > ISP Parameters (PPPoE)
The following table describes the labels in this screen.
Table 14 Connection Wizard > ISP Parameters (PPPoE)
LABEL
DESCRIPTION
Connection Type
Select PPP over Ethernet.
Service Name
Enter the PPP service name provided by your ISP. If your ISP did not provide a
service name, leave this field blank.
User Name
Enter the user name provided by your ISP.
Password
Enter the password provided by your ISP.
< Back
Click this to go to the previous screen.
Next >
Click this to go to the next screen.
Exit
Click this to close this screen and return to the main screen.