ZyXEL Communications P-2304R-P1 Series - Manual (Page 127)

Chapter 10 Phone
P-2304R-P1 Series User’s Guide
127
Figure 64 VoIP > Phone > Common
Each field is described in the following table.
10.2.4 Phone Region Screen
Use this screen to maintain settings that often depend on which region of the world the ZyXEL
Device is in. To access this screen, click VoIP > Phone > Region.
Figure 65 VoIP > Phone > Region
Each field is described in the following table.
Table 54 VoIP > Phone > Common
LABEL DESCRIPTION
Active Immediate
Dial
Select this if you want to use the pound key (#) to tell the ZyXEL Device to make
the phone call immediately, instead of waiting the number of seconds you selected
in the Dialing Interval Select in VoIP > Phone > Analog Phone > Advanced.
If you select this, dial the phone number, and then press the pound key. The
ZyXEL Device makes the call immediately, instead of waiting. You can still wait, if
you want.
Apply Click this to save your changes and to apply them to the ZyXEL Device.
Reset Click this to set every field in this screen to its last-saved value.
Table 55 VoIP > Phone > Region
LABEL DESCRIPTION
Region Settings Select the place in which the ZyXEL Device is located. Do not select Default.
Call Service Mode Select the mode for supplementary phone services (call hold, call waiting, call
transfer and three-way conference calls) that your VoIP service provider supports.
Europe Type - use supplementary phone services in European mode
USA Type - use supplementary phone services American mode
You might have to subscribe to these services to use them. Contact your VoIP
service provider.
Apply Click this to save your changes and to apply them to the ZyXEL Device.
Reset Click this to set every field in this screen to its last-saved value.