ZyXEL Communications P-2304R-P1 Series - Manual (Page 79)

Chapter 6 WAN
P-2304R-P1 Series User’s Guide
79
Each field is described in the following table.
6.2.3 PPPoE
Use this screen to set up a PPPoE connection with the ISP. To access this screen, click
Network > WAN > Internet Connection.
Table 31 Network > WAN > Internet Connection (Roadrunner)
LABEL DESCRIPTION
ISP Parameters
for Internet
Access
Encapsulation Select Ethernet.
Service Type Select the Roadrunner service provided by your ISP.
User Name Enter the user name provided by your ISP.
Password Enter the password provided by your ISP.
Retype to Confirm Retype your password to make sure you entered it correctly.
Login Server IP
Address
Enter the IP address of the login server provided by your ISP.
WAN MAC
Address
Spoof WAN MAC
Address
Select this if you do not want to use the default MAC address for the ZyXEL
Device.
Clone the
computer’s MAC
address - IP
Address
This field is enabled if you select Spoof WAN MAC Address.
Enter the IP address of the computer whose MAC address you want the ZyXEL
Device to use instead of the default MAC address.
Apply Click this to save your changes and to apply them to the ZyXEL Device.
Reset Click this to set every field in this screen to its last-saved value.