ZyXEL Communications P-2304R-P1 Series - Manual (Page 78)

Chapter 6 WAN
P-2304R-P1 Series User’s Guide
78
6.2.2 Roadrunner
Use this screen to set up an Ethernet connection using Roadrunner service with the ISP. To
access this screen, click Network > WAN > Internet Connection.
Figure 36 Network > WAN > Internet Connection (Roadrunner)
Service Type Select Standard.
WAN IP Address
Assignment
Get automatically
from ISP
Select this if your ISP did not assign you a static IP address.
Use Fixed IP
Address
Select this if your ISP assigned you a static IP address.
IP Address Enter the IP address provided by your ISP.
IP Subnet Mask Enter the subnet mask provided by your ISP.
Gateway IP
Address
Enter the gateway provided by your ISP. If your ISP did not provide one, leave it
blank.
WAN MAC
Address
Spoof WAN MAC
Address
Select this if you do not want to use the default MAC address for the ZyXEL
Device.
Clone the
computer’s MAC
address - IP
Address
This field is enabled if you select Spoof WAN MAC Address.
Enter the IP address of the computer whose MAC address you want the ZyXEL
Device to use instead of the default MAC address.
Apply Click this to save your changes and to apply them to the ZyXEL Device.
Reset Click this to set every field in this screen to its last-saved value.
Table 30 Network > WAN > Internet Connection (Ethernet)
LABEL DESCRIPTION