Zenith H20H52DT - Manual (Page 14)

Installer Remote Key Functions
Page 14
A quick list of the keys on the optional HP602 installer’s remote and what they do.
1 2 3
4 5 6
7
0
8
ENTER
9
POWER
TV/
FM
L F SHBK
M T U E
O V L
UME
A CH N
NEL
MENU
ADJ ADJ
SELECT
TIMER BANK
CH PREVIEW
BED 1 BED 2
CC
-
+
-
+
remote control part number
HP602
124-213-06
POWER
Turns TV On or Off.
CC (CLOSED CAPTIONING)
Press to access closed captions.
Press ENTER to exit.
TV/FM
Selects TV or Radio on TVs
equipped with FM radio.
VOLUME LEFT/RIGHT
Adjusts the sound levels.
ENTER
Press to view the Channel/Time
display or
to remove any on-screen display
or menu.
TIMER
Press repeatedly to adjust TV
turn-off time up to 4-hours.
Use to pick AM/PM in Clock
menu.
MENU/SELECT/ADJ (ADJUST)
Press MENU repeatedly to scroll
through either the Installer, or
User menus. Use
SELECT to choose an option
and ADJ (adjust) to change the
selected option.
FLASHBK (FLASHBACK)
Return to the last channel viewed.
MUTE
Turns sound Off and On, while the
picture remains.
CHANNEL (UP/DOWN)
Tunes to next available channel.
NUMBER KEYPAD
Selects channels directly and
enters numeric values for some
options.
BED 1/BED 2 (*See Note Below)
Determines the code set
transmitted, Bed 1 or Bed 2.
Switch setting must correspond
to item 27, HOSPITAL MODE
setting in the TV’s Installer Menu.
BANK
Press and repeat to select a
Channel Memory Bank - - 1, 2, 3,
or 4 (standby).
CHANNEL PREVIEW
Gives installer access to the
patient’s menus. Displays the
available TV channels and
patient’s Parental Control menu.
*Note: Bed 1 - Bed 2 switch on installer/patient remote. The position of the Bed 1 - Bed 2 switch
must correspond to the setting in the Installer’s menu. The switch above can be set by sliding it
to the Bed 1 or Bed 2 position. On the patients’ remote, the Bed 1 or Bed 2 position can be
selected by using a paper clip or a ball-point pen to slide the switch to the correct position.
Left position = Bed 1.
Right Position = Bed 2.