Zenith H20H52DT - Manual (Page 38)

79-I. UPN MSB-1
User programmable number, most significant byte-
1 readable by M.P.I. command.
80-I. UPN MSB-2
User programmable number, most significant byte-
2 readable by M.P.I. command.
81-I. UPN LSB
User programmable number, least significant byte
readable by M.P.I. command.
82-I. CHKSM ERROR
Enforces rigid M.P.I checksum validation.
Set to 1 for validation. Set to 0 to turn off.
83-I. HANDSHK TIME
Adds an additional delay to the handshake time
which is 64 msec, thus relaxing M.P.I. timing
requirements to be compatible with PC based
Windows controlled systems, range is 0 - 5.
Set to 0 to retain standard 64 msec delay.
Set to 1 - 5 to increase @ 16 msec additional, the
delay up to 144 msec.
84-I. PERMANENT BLK
Allows Parental Control blocking schemes to be
permanent by removing the blocking hours
function.
Set to 1 to install Parental Control blocking
restrictions permanently.
Set to 0 for user-specified hours control of
blocking schemes.
85-I. NOT USED
86-I. NOT USED
87-I. NOT USED
88-I. EN NOISE MUTE (Enable Noise Mute)
Enables soft mute when a signal is not present.
89-I POKE ENABLE
Enables poke function through M.P.I. commands
90-I KEY LOCK
Disables front panel keys. Set to 1 for disable. Set
to 0 for enable.
Page 38
Installer Menu Item 79-I through 90-I: Detailed Descriptions.
Installer Menus