Zenith H20H52DT - Manual (Page 16)

Setting Up Channel Line Up/Add/Delete/Blank
Page 16
Fine-tune the patient’s channel selection list.
Press the MENU key on the optional
Installer’s remote to show the Setup menu on
the screen.
Press SELECT repeatedly to highlight the
Add/Del/Blnk option.
Using either the NUMBER keypad and
ENTER or the Channel Up/Down arrows on
the remote, select a channel. (If adding a
deleted channel, you will need to use the
number keypad and ENTER).
Using the Right/Left ADJ arrow, choose
whether the channel is Added, Deleted, or
Blank.
To continue, select another channel and
repeat Step 3. When you are finished, press
ENTER to remove menu.
Adding VCR 3, VCR 4, or FM to the
Channel Preview List
Go to the Setup menu, select the
Add/Del/Blnk option. Use Channel Up/Down
to select the option and choose Added.
Note: If the option was turned off in the
Service menu, you will have to reinstate it
before it can appear as an option in the
Channel Preview list.
Note: You can elect to Add, Delete or Blank:
VCR 3 and VCR 4. FM can be Added or
Deleted, but not Blanked.
1
2
3
4
5
If you delete a channel, it isn’t gone for good. Just
select it using the NUMBER keypad on the
remote, or add it later.
1 2 3
4 5 6
7
0
8
ENTER
9
POWER
TV/
FM
FLSHBK
MUTE
VOL
UME
CHAN
NEL
MENU
ADJ ADJ
SELECT
TIMER BANK
CH PREVIEW
BED 1 BED 2
CC
-
+
-
+
2
4
3/5
1
3
3
Adds new channels to the list that the patient can scroll thorugh when using the remote.
Removes channels for one reason or another from the list that the patient can scroll
through.
Removes the video signal from a channel so the patient will only receive the audio signal.
ADD
DELETE
BLANK
Mini Glossary
AUTO PROGRAM
ADD/DEL/BLNK
CH. LABELS
CLOCK SET
TIMER
CAPTIONS
LANGUAGE
SETUP MENU
CH 44 ADDED
1