Zenith H20H52DT - Manual (Page 18)

AUTO
EASTERN
CENTRAL
MOUNTAIN
PACIFIC
CLOCK MENU
CLOCK SET
TIME ZONE
DAY. SAVING
PRESS SELECT TO CHOOSE
PRESS ADJ TO CHANGE
AUTO
AUTO
OFF
ON
10:43 AM
CLOCK MENU
CLOCK SET
TIME SET
PRESS SELECT TO CHOOSE
PRESS ADJ TO CHANGE
MANUAL
TIMER
AUTO PROGRAM
ADD/DEL/BLNK
CH. LABELS
CLOCK SET
TIMER
CAPTIONS
LANGUAGE
SETUP MENU
T O SET CLOCK
AUTO PROGRAM
ADD/DEL/BLNK
CH. LABELS
CLOCK SET
TIMER
CAPTIONS
LANGUAGE
SETUP MENU
T O SET CLOCK
1 2 3
5 4 6
7
0
8
ENTER
9
MENU
ADJ ADJ
SELECT
TIMER BANK
CH PREVIEW
BED 1 BED 2
3
5
3
4
2
1
Clock Set
Page 18
Clock Auto/Manual Operating Modes Setup
Use MENU, SELECT, and ADJ Left/Right to choose the
Clock menu and to set up the clock menu options, with the
optional Installer’s remote.
Clock Mode
Auto: TV automatically sets the time. Time Zone: User can
choose the time zone or have the TV set it automatically.
Day. Savings: User can choose to have daylight savings
adjust the clock time one hour, or have the TV adjust it
automatically.
Manual: User sets the time on the clock.
Use ENTER repeatedly to remove menus.
The clock can also be set using 24 hour “military time.” For p.m. Settings add 1200. For
example, to set 6:30 p.m., add 1200 to 630, = enter 1830.
For Auto Clock Set to work, TV must be tuned to a channel that has XDS data
available. Auto Clock Set, sets the time only once while the TV is on. To set the clock
with XDS data, turn TV off, then back on again, or set the clock time manually.
A four-digit figure broken down into hours and minutes, used to enter the current time
when setting the clock or wake-up alarm.
First two digits that are entered when setting the clock or the wake-up alarm.
The last two digits that are entered when setting the clock, or the wake-up alarm.
Chooses AM or PM when setting the clock.
TIME
HOURS
MINUTES
TIMER
Mini Glossary
1