Power down procedure – Xantrex Technology PH1800 User Manual
Page 11
Safety
975-0288-01-01
ix
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Power Down Procedure
The power down procedure will be depend on how the unit has been
installed. If using the AC cord to plug the PowerHub directly into a
generator, this is referred to as “softwiring” or “plug-and-go”. If installing
in a permanent location, that is referred to as “hardwiring”.
If softwired......
To Power Down the PowerHub 1800:
Figure ii Power Down Procedure for Softwired Installations
Disconnect Loads
Press ON/OFF Switch to turn
OFF Inverter/Charger
Disconnect the PowerHub
from the generator and
turn the generator OFF.
Disconnect the Battery Box(es)
from the Inverter
1
2
3
4
OFF