Xantrex Technology PH1800 - Manual (Page 30)

Operation
2–6 975-0288-01-01
Basic Operation
The following figures show what the Inverter Control Panel will look like
when the user controls are used.
Power On and Off
Important: The values shown in the displays of the following illustrations are
examples only. Actual values may vary based on what is connected to the unit.
Figure 2-2 Basic Startup Screens
To turn the power to the
PowerHub ON or OFF:
◆ Press and hold the green
ON/OFF Power Button for
approximately 1 second.
If any input power is available, the Inverter Control
panel will display as shown below. The value shown
on the display defaults to indicate Net Power.
Net Power = Input - Output
If no input power is available and no loads
are connected to the unit, the Inverter
Control panel will display as shown below.
Default Screen Example
Example indicates 540 watts.
Default Screen Example