Xantrex Technology PH1800 - Manual (Page 22)

Introduction
1–4 975-0288-01-01
Inverter Features
User Features The inverter consists of the following user features.
• The Inverter Control Panel provides a user interface for monitoring
power levels, battery levels, and controlling the inverter functions and
displays.
• Four 120 Vac outlets on the front panel provide up to 1440 W
(continuous) output power.
• One 15 A supplemental protector provides over-load protection to the
four AC outlets on the front panel.
• One AC Indicator LED. This LED will illuminate whenever AC
power is available, whether the unit is ON or OFF. See page 2–3 for
additional information about this LED.
• One PVGFP, ground fault protection fuse for safety when using solar
and wind renewable energy inputs.
WARNING: Shock Hazard
The 15 A circuit breaker on the front panel is only connected to the four outlets
on the front of the panel and only disconnects power to these outlets when
activated. It does not disable output through the output terminals used for
hardwiring. Therefore, power can still be available to loads connected through a
hardwired installation.
Figure 1-2 PowerHub 1800 Features
Inverter Control
Panel
AC Outlets (x4)
15 A Supplemental
Protector
AC Indicator LED
ON/OFF Power
Button