Yamaha DTX700 - Manual (Page 32)

KIT
DTX700 Reference Manual 32
From the Exchange Pad page, you can swap the set-
tings of a pair of pads. Use Pad1 and Pad2 to select
the pads, and then press the [F3] button (EXECUTE)
to exchange their settings.
Pad1, Pad2
Use these parameters to select the two pads whose settings are to
be swapped.
Settings: SnareHd, SnareOp, SnareCl, SnrHdOff, SnrOpOff,
SnrClOff, Tom1Hd, Tom1Rm1, Tom1Rm2, Tom2Hd,
Tom2Rm1, Tom2Rm2, Tom3Hd, Tom3Rm1, Tom3Rm2,
RideBw, RideEg, RideCp, Crash1Bw, Crash1Eg,
Crash1Cp, Crash2Bw, Crash2Eg, Crash2Cp, HHBwOp,
HHEgOp, HHBwCl, HHEgCl, HHFtCl, HHSplsh, Kick,
Pad10, Pad11Hd, Pad11Rm1, Pad11Rm2, HHKick
On this page, you can select two kits whose settings
are to be swapped (i.e., Kit1 and Kit2). You then
press the [F3] button (EXECUTE) to exchange their
settings.
Kit1, Kit2
Use these parameters to select the two kits whose settings are to
be swapped.
Settings: 01 to 60
From the Clear Pad page, you can initialize individ-
ual pads from the current drum kit (i.e., restore their
default settings). Use the Pad parameter to select
the pad whose settings are to be initialized, and then
press the [F3] button (EXECUTE).
Pad
Use this parameter to select the pad whose settings are to be ini-
tialized.
Settings: SnareHd, SnareOp, SnareCl, SnrHdOff, SnrOpOff,
SnrClOff, Tom1Hd, Tom1Rm1, Tom1Rm2, Tom2Hd,
Tom2Rm1, Tom2Rm2, Tom3Hd, Tom3Rm1, Tom3Rm2,
RideBw, RideEg, RideCp, Crash1Bw, Crash1Eg,
Crash1Cp, Crash2Bw, Crash2Eg, Crash2Cp, HHBwOp,
HHEgOp, HHBwCl, HHEgCl, HHFtCl, HHSplsh, Kick,
Pad10, Pad11Hd, Pad11Rm1, Pad11Rm2, HHKick
From the Clear Kit page, you can initialize the cur-
rent drum kit. Simply press the [F3] button (EXE-
CUTE) to do so.
KIT/JOB/EXCHANGE PAD
KIT/JOB/EXCHANGE KIT
KIT/JOB/CLEAR PAD
KIT/JOB/CLEAR KIT