Sounds produced using the pads, 4 instrument assignments for trigger input jacks, Voices grouped as kits – Yamaha DTX700 User Manual

Page 4: Voices

Advertising
background image

Internal Design of the DTX700

DTX700 Reference Manual

4

Instrument assignments for trigger input jacks

Assigning voices individually to each trigger input source can
be quite time consuming. In order to speed up this process, the
DTX700 features instrument parameters that group together the
drum voices assigned to the multiple trigger input sources cor-
responding to each trigger input jack – or in other words, the
drum voices assigned to each pad.

Voices grouped as kits

For most drummers, the preset drum kits built into the DTX700
are sufficient to provide a wide range of variation in perfor-
mances. If, however, you wish to customize these presets, you
can simply change the instrument set for each trigger input jack
to assign new voices to each of the corresponding pad’s trigger
input sources. If you wish to go even further, meanwhile, you
can also change voice assignments on an individual trigger
input source basis to create drum kits finely tuned to your indi-
vidual needs

(see page 16)

.

Sounds Produced Using the Pads

Whenever the DTX700’s internal tone generator receives a trigger
signal produced by striking a pad or by operating a controller, it will
play the voice or song assigned to that pad or controller. As
described below, three different types of assignment are supported –
namely, voices, songs, and waves.

• Voices

Drum sounds such as snares, bass drums, and cymbals; percus-
sion sounds; and pitched-instrument sounds such as piano,
xylophone, and guitar.

• Songs

Phrases containing performance data for a range of different
instruments.

• Waves

Audio files imported into the DTX700 from a variety of
sources.

The Menu area’s Kit/Voice page is used to assign voices, songs,
and waves to pads and controllers. On that page, available assign-
ments are categorized by musical instrument type (in the case of
voices), as songs, or as waves. While these three assignment types
can all be defined for pads in the same way, it is important to
remember that each type plays in a different way and is configured
using different parameters.

Voices

The DTX700 comes preloaded with a vast library of drum
sounds, such as snares, bass drums, and cymbals, together with
a broad spectrum of percussion-instrument sounds. Also
included are many pitched instruments, such as piano, xylo-
phone, and guitar. The term “voice” is used to refer to these
built-in instrument sounds. Drum and percussion voices from
this collection are not rooted at one specific pitch; instead, you
can intuitively adjust their tuning in order to match the sounds
of other instruments. Meanwhile, pitched-instrument voices
such as piano and guitar can be assigned to pads with a specific
pitch setting, thus allowing you to play several different notes
together to produce chords; in addition, you can also have pads
trigger successive notes from a phrase each time they are
struck, making it possible to play melodic parts

(see page 21)

.

With the timing and strength of your playing reflected in the
sound produced by preset voices, you can perform with practi-
cally the same level of expressiveness as afforded by acoustic
instruments.

Choosing instruments for each trigger input jack

By selecting an instrument, all of the
voices assigned to a pad’s three trigger
input sources can be changed together.

Three-zone pads (like the PCY135):

Single-zone pads (like the KP65):

Trigger

input

source

Layer

*1

MIDI
note

number

Layer

*2

Instrument

Crash1Bw

Layer A

Note No.

Voice

Instrument

Layer B

Note No.

Voice

Layer C

Note No.

Voice

Layer D

Note No.

Voice

Crash1Eg

Layer A

Note No.

Voice

Layer B

Note No.

Voice

Layer C

Note No.

Voice

Layer D

Note No.

Voice

Crash1Cp

Layer A

Note No.

Voice

Layer B

Note No.

Voice

Layer C

Note No.

Voice

Layer D

Note No.

Voice

Trigger

input

source

Layer

*1

MIDI
note

number

Layer

*2

Instrument

Kick

Layer A

Note No.

Voice

Instrument

Layer B

Note No.

Voice

Layer C

Note No.

Voice

Layer D

Note No.

Voice

*1: See

page 6

for details.

*2: Sounds set using the VoiceCategory

and VoiceNumber parameters from
the Menu area’s Kit/Voice page.

Advertising