Song/midi 3/3, For song management tasks, Song/job/clear – Yamaha DTX700 User Manual
Page 35: Song/job/clear all, Varsend(dry) chosend revsend, Clear clearall, Song/job/clear song/job/clear all
SONG
DTX700 Reference Manual
35
q
MIDI Channel (Ch)
Use this parameter to select the current MIDI channel number.
Settings:
1 to 16
Variation Send Level (VarSend(Dry))
Use this parameter to set the variation-effect send level to be sent
by the current song on the selected MIDI channel.
Settings:
0 to 127
NOTE
•
If “off” or “PC” has been selected for the Transmit parameter
above
, this setting will be displayed as “---” and
modification will not be possible.
•
This parameter cannot be set for MIDI channel 10. Accord-
ingly, it will be displayed as “---” when that channel has been
selected.
Chorus Send Level (ChoSend)
Use this parameter to set the chorus-send level to be sent by the
current song on the selected MIDI channel.
Settings:
0 to 127
NOTE
•
If “off” or “PC” has been selected for the Transmit parameter
above
, this setting will be displayed as “---” and
modification will not be possible.
•
If you change the chorus send level for MIDI channel 10, the
current kit’s ChoSend (Chorus Send Level) setting
will also change to this new value.
Reverb Send Level (RevSend)
Use this parameter to set the reverb-send level to be sent by the
current song on the selected MIDI channel.
Settings:
0 to 127
NOTE
•
If “off” or “PC” has been selected for the Transmit parameter
above
, this setting will be displayed as “---” and
modification will not be possible.
•
If you change the reverb send level for MIDI channel 10, the
current kit’s Reverb Send Level (RevSend) setting
will also change to this new value.
SONG/JOB
You can use the Clear Current Song (Clear) page to
delete all of the current User song’s data.
CAUTION
•
When a User song is cleared, its data is completely erased
from the DTX700’s memory. Be sure, therefore, to always
save important song data on a USB memory device or the
like before clearing it.
•
After clearing a song, be sure to store your new settings.
From the Clear All Songs (Clear All) page, you can
delete all User songs.
CAUTION
•
When a User song is cleared, its data is completely erased
from the DTX700’s memory. Be sure, therefore, to always
save important song data on a USB memory device or the
like before clearing it.
•
After clearing songs, be sure to store your new settings.
SONG/MIDI 3/3
q
For song management tasks
SONG/JOB/CLEAR
SONG/JOB/CLEAR ALL