Yamaha DTX700 - Manual (Page 34)

SONG
DTX700 Reference Manual 34
3. When you have entered the required name, press the dial
or the [EXIT] button to return to the previous page.
4. Press the [STORE] button and the dial to store your new
setting.
SONG/MIDI
: The current MIDI channel number is reduced by 1.
: The current MIDI channel number is increased by 1.
q MIDI Channel (Ch)
Use this parameter to select the current MIDI channel number (1
to 16).
Settings: 1 to 16
Transmit
Use this parameter to specify which MIDI messages the current
song will send to the internal tone generator and external MIDI
devices on the selected MIDI channel.
Settings: off, all, PC
Volume
Use this parameter to set the MIDI volume (Control Change 7)
sent by the current song. In terms of the internal tone generator,
this value affects all voices played on the MIDI channel indicated
by
q .
Settings: 0 to 127
NOTE
• If “off” or “PC” has been selected for the Transmit parameter
above, this setting will be displayed as “---” and modification
will not be possible.
• If you change the volume setting for MIDI channel 10, the cur-
rent kit’s Volume parameter setting from the Menu area’s Kit/
Common page will also change to this new value.
Panorama (Pan)
Use this parameter to set the stereo panning (Control Change 10)
sent by the current song on the selected MIDI channel. In terms
of the internal tone generator, this value affects all voices on that
channel.
Settings: L64 to C to R63
NOTE
• If “off” or “PC” has been selected for the Transmit parameter
above, this setting will be displayed as “---” and modification
will not be possible.
q MIDI Channel (Ch)
Use this parameter to select the current MIDI channel number.
Settings: 1 to 16
Bank Select MSB (MSB)
Use this parameter to set a Bank Select MSB value sent by the
current song on the selected MIDI channel.
Settings: 000 to 127
Bank Select LSB (LSB)
Use this parameter to set a Bank Select LSB value sent by the
current song on the selected MIDI channel.
Settings: 000 to 127
Program Change (PC)
Use this parameter to set a Program Change number sent by the
current song on the selected MIDI channel.
Settings: 000 to 128
NOTE
• If “off” has been selected for the Transmit parameter above,
this setting will be displayed as “---” and modification will not
be possible.
To select a DTX700 drum kit, set parameters for MIDI channel
10 as follows. Setting a Program Change number for this MIDI
channel ensures that the kit will change immediately whenever
the song is played.
MSB = 125, LSB = 001, PC = Number of desired kit
For MIDI-related settings
SONG/MIDI 1/3
off No MIDI messages will be sent.
all All MIDI messages set here will be sent.
PC
Only Program Change messages, including Bank
Select MSB and LSB messages, will be sent.
q SONG/MIDI 2/3
q