Yamaha DTX700 - Manual (Page 58)

FILE
DTX700 Reference Manual 58
3. Select the file type.
Move the cursor to the Type row, press the dial, and select
the type of file you wish to save.
Settings: All, AllKit, AllWave, AllSong, AllTrigger, Utility
NOTE
• If you select “AllWave” despite wave data having not yet
being created, a “No Wave Data” error message will be
displayed and no data will be saved.
4. Enter a name for the file to be saved.
Move the cursor to the Name row and press the dial to call
up the file naming page.
 Entering file names
4-1 Move the cursor within the name field using the [F1]
and [F3] buttons and select a character for that posi-
tion by turning the dial or pressing the [-/DEC] and
[+/INC] buttons. A name of up to 8 characters in
length can be assigned to files. The following charac-
ters can be used.
NOTE
• If you hold down the [SHIFT] button and press the
[F1] or [F3] button, the cursor will move to the start
or end of the file name field.
• If you hold down the [SHIFT] button and press the
[-/DEC] or [+/INC] button, or alternatively, hold
down the [SHIFT] button and turn the dial, the cur-
sor will jump between the “
”, “0”, “A”, and “~” char-
acters.
4-2 When you have entered the required name, press the
dial or the [EXIT] button to return to the previous
page.
NOTE
• Any space characters included in file names will
be automatically replaced with “_” (i.e., an under-
score).
5. Press the [F3] button (EXECUTE).
You will be asked to confirm that the file is to be saved.
Press the dial to proceed. Alternatively, you can press the
[EXIT] button to return to Step 2 above without saving.
If a file of the same name already exists, you will be asked
to confirm whether it is to be overwritten as shown below.
If you wish to set a different file name to avoid overwrit-
ing, press the [EXIT] button to return to the page from
Step 2 above.
6. Press the dial to save the file.
The following message will be displayed as the data is
being saved. If you press the [EXIT] button at this time,
the save process will be aborted and you will be returned
to the page from Step 2 above.
CAUTION
• Do not unplug the USB memory device from the
[USB TO DEVICE] port or turn off either the mem-
ory device or the DTX700 while data is being saved.
Failure to observe this precaution can lead to the
memory device or the DTX700 being permanently
damaged.
When the data has been saved, you will be returned to the
page from Step 2 above.
All
All User data – i.e., all kits, waves, songs,
and triggers in addition to utility data
AllKit All kit data
AllWave All wave data
AllSong All song data
AllTrigger All trigger data
Utility Utility data