Xerox 480 ST - Manual (Page 309)

Xerox Document Centre System Administration Guide Page 22 - 3
22. P
o
rt
91
00
Pr
in
ti
n
g
22
. Po
rt
91
0
0
Pr
in
ti
n
g
Go to the Document Center and...
1. Connect your Document Centre to the network with the appro-
priate cabling.
2. Enter the Tools pathway.
a) Press the Access ( or ) button.
b) On the keypad enter 1111 or the current password. Press
the Enter button when finished. The Touch Screen will
be used for the remainder of the data entry, unless
instructed otherwise.
c) Press the Go to Tools button.
3. Enter the Network Setup menus.
a) Wait for the screen to refresh and press the Connectivity
and Network Setup button.
b) Wait for the screen to refresh and press the Network
Setup button.
c) Press the TCP/IP Options button.