Xerox 480 ST - Manual (Page 54)

Page 6 - 2 Xerox Document Centre System Administration Guide
NOTE ALL Print Servers you create must have a password. When your
printer will service queues on multiple fileservers, the Print Server
name must be the same on all fileservers and the Print Server
password must be the same on all fileservers.
Go to the Document Centre and...
1. Connect your Document Centre to the network with the
appropriate cabling.
2. Enter the Tools pathway.
a) Press the Access ( or ) button.
b) On the keypad enter 1111 or the current password. Press
the Enter button when finished. The Touch Screen will
be used for the remainder of the data entry, unless
instructed otherwise.
c) Press the Go to Tools button.
3. Enable the Network Protocol.
a) Wait for the screen to refresh and press the Connectivity
and Network Setup button.
b) Wait for the screen to refresh and press the Network
Setup button.
c) Press the NetWare button.
d) Wait for the screen to refresh and press the Protocol and
Media button.
e) Press the Enable button. If Physical Media buttons
appear, select either Ethernet or Token Ring. Press
Save.