Physical connection – Xerox WorkCentre 6400 User Manual
Page 14
Advertising
Initial Setup
WorkCentre 6400 Multifunction Printer
System Administrator Guide
14
Physical Connection
To connect your printer:
1.
Connect the power cable to the printer, and plug it into an electrical outlet.
2.
Connect one end of a Category 5 or better Ethernet cable to the Ethernet port in the back of the
printer. Connect the other end of the cable to a correctly configured network port.
3.
If your printer has fax installed, connect it to a correctly configured telephone line.
4.
Turn the printer on.
Advertising