Xerox WorkCentre 6400 - Manual (Page 152)

Administrator Tools
WorkCentre 6400 Multifunction Printer
System Administrator Guide 152
Energy Saving Settings
Note: If your printer is locked, you must log in as a system administrator. For details, see System
Administrator Access at the Control Panel on page 15.
1. At the printer control panel, press the Machine Status, then touch the Tools tab.
2. Touch Device Settings > General > Energy Saver.
3. Touch the arrows to set the time that the printer will wait to switch from:
•
Standby Mode to Low Power Mode
• Low Power Mode to Sleep Mode