System setup, Print server side, Client user side – Edimax Technology PS-3103P User Manual
Page 107: 3 system setup
9.3 System Setup
9.3.1 Print Server Side
Step1.Execute the PrintSir Configuration Utility。
Step2.In the IP Cfg page, configure the IP address.
Step3.In the Mail Print Cfg page ， configure Mail
polling time and Mailbox parameters.
Mail Polling Time : Default is 1 minute;
Intervals for PrintSir to check
Emails in the Mailbox.
Mail Server, Mail Account and Password are
Mailbox’s Email server's IP
address, account, and password
respectively.
Step4. Press "Write" then "Reset" button.
9.3.2 Client User Side
At first, please confirm that the client computer
has installed and setup the TCP/IP protocol correctly.
Email Printing provides three printing methods, the
instructions and installation are described below:
9.3.2.1 Print directly from appellations by using the “Print to
Email printing driver”
At first, the client user needs to install and setup
the “Print to Email Printing Driver” from the CD-
ROM shipped with the PrintSir Package. You can
deliver the “Email Printing Driver” to any one who will
107