Edimax Technology PS-3103P - Manual (Page 48)

To use this method,
1. Log into your NetWare server as SUPERVISOR.
2. Insert the CD-ROM included with the PrintSir,
and change to the appropriate drive and directory.
Ex. e:\dosutil\
3. Run the INSTALL program
4. Select your new PrintSir from the displayed list
and press Enter. The name listed will be the
same as the Device Name printed on a label on
your PrintSir.
5. A list of defaults will be displayed. If you need
to change any of these items, use the arrow keys
to choose the item you need to change, then press
Enter to display a list of choices. When all of the
values are correct, select the Continue
Installation item and press Enter.
48