Edimax Technology PS-3103P - Manual (Page 81)

select the PrintSir you would like to configure from
the PrintSir Name’s field under the General tag. The
system will, at the same time, display the selected
PrintSir’s model number and firmware version.
z You may select any available printer port in the
Printer Port’s field at the bottom of that page, and
then press the “TestPrint” button to test print.
z By pressing the “Refresh” button, you may manually
search again for PrintSirs on the network for you to
select a newly added PrintSir.
7.3 PrintSir Status - PrintSir Network Status
The PrintSir Status page displays the network ability
and status of the PrintSir in detail.
7.4 Printer Status - Attached Printer Status
81