Edimax Technology PS-3103P - Manual (Page 85)

7.9 PrintSir Cfg - PrintSir Network Ability
Setting
The PrintSir Cfg page allows you to set:
z The Diagnostic Printout, which determines
whether or not a diagnostic printout should be
printed on the printer to which the PrintSir is
connected.
z The TCP/IP Support, which determines whether or
not TCP/IP network printing is supported
z The NetWare Support, which determines whether
or not NetWare network printing is supported
z The NetBEUI Support, which determines whether
or not NetBEUI network printing is supported
z The Write button: save the configuration to the
PrintSir.
z The Reset button: reset the PrintSir to let the
changes take effect.
85