Edimax Technology PS-3103P - Manual (Page 53)

identical to the PSxxxxxx name printed on the
label of the PrintSir, or you can use an alias
name you have assigned using PSETUP.
17. Press Enter to select the newly created print
server.
18. Select Print Server Configuration.
19. Select Printer Configuration.
20. Select Printer 0 (or Printer 1, Printer 2), and
press Enter, then select Parallel LPT1 (or LPT2,
LPT3) in the Type field. If your PrintSir is with
only one port, you do not need to configure this
Type field.
53