Edimax Technology 3G-6200nL V2 - Manual (Page 21)

20
3. Input “ipconfig”, then press “Enter”. Use the IP address following “Default
Gateway” to access this router’s web-based configuration interface. Please note
that the IP address you find may be different from this illustrated example.
NOTE: If there is no IP address following “Default Gateway”, or if the address
following “IP Address” begins with “169”, please try the following procedures:
 Recheck the cable connection between the computer and the router.
 Go to the beginning of this chapter and recheck every step of the setup
procedure.
 If both of the above fails, reset the broadband router.