Edimax Technology 3G-6200nL V2 - Manual (Page 75)

74
Click ‘Reset’
Edit If you want to modify the content of a specific
rule, please check the ‘select’ box of the rule
you want to edit, then click ‘Edit’ button. Only
one rule should be selected a time!
Delete Selected You can delete selected rules by clicking this
button. You can select one or more rules to
delete by check the ‘select’ the box of the
rule(s) you want to delete a time. If the QoS
table is empty, this button will be grayed out
and cannot be clicked.
Delete All By clicking this button, you can delete all rules
currently listed in the QoS table. If the QoS
table is empty, this button will be grayed out
and cannot be clicked.
Move Up Move selected rule up. First QoS rule will be
proceed first, so you can move higher priority
rules up.
Move Down Move selected rule down.
When you finished with the settings in this page, you can click ‘Apply’ button to save
changes you made in this page, or you can click ‘Cancel’ to discard changes. After you click
‘Apply’ button, you’ll see the following messages:
Please click ‘Apply’ to save changes you made and restart the broadband router, this
requires about 60 seconds and the broadband router will stop responding (this is normal
and is not malfunction). You can reconnect to this broadband router and continue on other
settings later.