Edimax Technology 3G-6200nL V2 - Manual (Page 51)

50
DNS Address Select “Use the following IP address” if your ISP requires that
you do so.
DNS Address 1
and 2 Enter the primary and secondary DNS addresses assigned by
your ISP here.
Enable Dual-WAN
Access Check the “Enable Dual-WAN Access” box if your ISP requires
you to do so.
NOTE: These settings must be configured according to your Internet service. Please
contact your Internet service provider if you are not sure what to select.
Configure the “PPTP Settings” section.
Item Name Description
User ID Input the user name assigned by your ISP here.
Password Input the password assigned by your ISP here.
PPTP Gateway Input the PPTP gateway assigned by your ISP here.
Connection ID Give this connection a name (optional).
MTU Input the MTU value of your network connection here. If you
do not know, use the default value.
BEZEQ-ISRAEL Check the “Enable” box if you are in Israel and using BEZEQ
network services.
Connection Type Please specify a connection type here. There are 3 options:
1. “Continuous” keeps the Internet connection alive all the
time.
2. “Connect on Demand” only connects to the Internet when
you initiate Internet connection.
3. “Manual” connects to the Internet only when the
“Connect” button on this page is clicked, and disconnects
when the “Disconnect” button is clicked.