Edimax Technology 3G-6200nL V2 - Manual (Page 26)

25
2-4-2 Using “Dynamic IP” as broadband connection type
1. If your Internet service provider assigns IP addresses to you automatically through
DHCP (Dynamic Host Configuration Protocol), select “Dynamic IP”.
Item Name Description
Host Name Input the host name of your computer here. This is optional
and only required if your ISP asks you to do so.
MAC Address If your ISP only permits computers with certain MAC
addresses to access the Internet, input your computer’s MAC
address here. Press “Clone Mac address” to fill the MAC
address field with your computer’s MAC address
automatically.
DNS Address Select “Use the following IP address” if your ISP requires that
you do so.
DNS Address 1
and 2 Enter the primary and secondary DNS addresses assigned by
your ISP here.
TTL Enable the “TTL” function if your ISP requires you to do so.
2. Click “OK” to complete setup.
3. When the following message appears, click “Apply” to save the changes and restart
the broadband router. The router will take about 60 seconds to restart.