Edimax Technology 3G-6200nL V2 - Manual (Page 34)

33
Access you to do so.
NOTE: These settings must be configured according to your Internet service. Please
contact your Internet service provider if you are not sure what to select.
3. Configure the “L2TP Settings” section.
Item Name Description
User ID Input the user name assigned by your ISP here.
Password Input the password assigned by your ISP here.
L2TP Gateway Input the L2TP gateway assigned by your ISP here.
MTU Input the MTU value of your network connection here. If you
do not know, use the default value.
Connection Type Please specify a connection type here. There are 3 options:
1. “Continuous” keeps the Internet connection alive all the
time.
2. “Connect on Demand” only connects to the Internet when
you initiate Internet connection.
3. “Manual” connects to the Internet only when the
“Connect” button on this page is clicked, and disconnects
when the “Disconnect” button is clicked.
Idle Time Out Specify the amount of time the router waits before shutting
down an idle connection. This option is only available when
“Connect on Demand” is selected.
4. Click “OK” to complete setup.