Edimax Technology 3G-6200nL V2 - Manual (Page 28)

27
2-4-4 Using “PPPoE” as broadband connection type
1. If your ISP is providing you Internet access via PPPoE (Point-to-Point Protocol over
Ethernet), select “PPPoE”.
Item Name Description
User Name Input the user name assigned by your ISP here.
Password Input the password assigned by your ISP here.
MAC Address If your ISP only permits computers with certain MAC
addresses to access the Internet, input your computer’s MAC
address here. Press “Clone Mac address” to fill the MAC
address field with your computer’s MAC address
automatically.
DNS Address Select “Use the following IP address” if your ISP requires that
you do so.
DNS Address 1
and 2 Enter the primary and secondary DNS addresses assigned by
your ISP here.
TTL Enable the “TTL” function if your ISP requires you to do so.
Service Name Give this Internet service a name (optional).
MTU Input the MTU value of your network connection here. If you
do not know, use the default value.
Connection Type Please specify a connection type here. There are 3 options:
1. “Continuous” keeps the Internet connection alive all the
time.