Edimax Technology 3G-6200nL V2 - Manual (Page 29)

28
2. “Connect on Demand” only connects to the Internet when
you initiate Internet connection.
3. “Manual” connects to the Internet only when the
“Connect” button on this page is clicked, and disconnects
when the “Disconnect” button is clicked.
Idle Time Out Specify the amount of time the router waits before shutting
down an idle connection. This option is only available when
“Connect on Demand” is selecte
Enable Dual-WAN
Access Check the “Enable Dual-WAN Access” box if your ISP requires
you to do so.
2. Click “OK” to complete setup.
3. When the following message appears, click “Apply” to save the changes and restart
the broadband router. The router will take about 60 seconds to restart.