Edimax Technology BR-6624 - Manual (Page 15)

Server setting must be Disabled, and the existing DHCP server must be
set to provide the IP address of the Load Balancer as the Default
Gateway.
• LAN Any IP –By default is disabled. If you enable “LAN Any IP”, that
means no matter what static IP address hold on the client (your PC). The
client has do not need to change the IP address, even though it has
different IP segment than LAN segment. It still can access Internet
through NAT.
DHCP
Configuration
• Lease Time – It is a finite period of time for a DHCP server lease an IP
address to a client..
• DNS Server IP for Client – An IP address of the default DNS server for
the client requesting DHCP service.
• Offered IP Range fields set the values used by the DHCP server when
allocating IP Addresses to DHCP clients. This range also determines the
number of DHCP clients supported.
DHCP Free List
• Free Entry indicates how many DHCP entries are not currently allocated,
and still available.
This table shows the IP addresses which have been allocated by the DHCP
Server function. For each address which has been allocated, the following
information is shown.
• Name – The "hostname" of the PC. In some cases, this may not be
known.
• MAC Address – The physical address (network adapter address) of the
PC.
• IP Address – The IP address allocated to this PC.
• Type – Indicates IP address to be dynamic or static.
• Status – If Dynamic, the IP address was allocated by this DHCP Server.
If Sniffed, the IP address was detected by examining the LAN, rather than
allocated by the DHCP Server. In this case, the Name is usually not
known.
• Time Left – The time expired since which IP address is leased.
Page 11